-
ACMO Specialities
Specifications
- Category Specialities
- Functionality 1
- Viscosity 12
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Acryloyl Morpholine, very high Tg, water soluble, good thermal stability, good adhesion
Recommended applications
- Flexo Inks
- Screen Inks
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
DMAA Specialities
Specifications
- Category Specialities
- Functionality 1
- Viscosity 1
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Dimethyl Acrylamide. Low viscosity, very good optical clarity, water soluble / very good moisture vapor transition rate. Very good oxygen penetration / water holding capacity. Homopolymers water soluble. [Anti-fogging coatings, contact lenses]
Recommended applications
- Screen Inks
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* BAPO Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Phenylbis (2,4,6-trimethylbenzoyl) phosphine oxice, especially suited for white pigmented formulations, allows very thick films to be cured, low volatility
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* BDK Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Benzildimethylketal, general purpose where non-yellowing is not essential
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOCURE* BDMM Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
2-Benzyl-2-dimethylamino-1-(4-morpholinophenyl)- butanone-1, excellent through cure in dark color pigmented systems, combinations with other photoinitiators
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOCURE* BMS Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Special Status / Contact us
- IECSC Special Status / Contact us
Key features
4-Benzoyl- 4'methyldiphenylsulphide, high reactivity, good solubility, LED curing 365nm, for pigmented systems in combination with amine synergists
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* BP Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Benzophenone, general purpose, low cost
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOCURE* CPK Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
1-Hydroxycyclohexylphenylketone, low yellowing
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* DEAP Photoinitiators
Specifications
- Category Photoinitiators
- REACH No
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
P 2,2 Diethoxyacetophenone, reactivity increases if used in combination with benzophenone and an amine synergist
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* DMHA Photoinitiators
Specifications
- Category Photoinitiators
- REACH No
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Dimethylhydroxyacetophenone, low yellowing, liquid
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOCURE* EMK Photoinitiators
Specifications
- Category Photoinitiators
- REACH No
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
4,4-Bis (diethylamino) benzophenone, excellent efficiency in pigmented systems, usable in UV/LED inks
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* LBC Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
1-Hydroxycyclohexylphenylketone and Benzophenone, liquid with good balance of surface and through cure for clear coatings
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOCURE* LBP Photoinitiators
Specifications
- Category Photoinitiators
- REACH No
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
4-Methylbenzophenone and Benzophenone, general purpose, liquid
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOCURE* LRT Photoinitiators
Specifications
- Category Photoinitiators
- Viscosity 220 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
liquid Type I photoinitiator blend for UV/LED-curable inks, coatings and adhesives. For clear and e.g. white pigmented systems, easy to add, can replace TPO, low yellowing, good surface and through cure, good for high film thickness, low oder
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* LTD Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
2,4,6 Trimethylbenzoyldiphenylphosphine oxide Dimethylhydroxyacetophenone, liquid photoinitiator for non-yellowing clear and white pigmented systems
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* LTM Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Liquid Photoinitiatorblend, white and thick coatings, liquid with good balance of surface and through cure, non-yellowing
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* MBB Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Methyl-o-benzoyl-benzoate, good surface cure
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOCURE* MBF Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
clear coatings, excellent surface curing photoinitiator especially in amine-free systems, low odor
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOCURE* MDEA Synergists
Specifications
- Category Synergists
- REACH No
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
low cost amine synergist
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOCURE* TPO Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
white and thick coatings, non-yellowing
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOCURE* TPO-L Photoinitiators
Specifications
- Category Photoinitiators
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Ethyl(2,4,6-trimethylbenzoyl) phenylphosphinate, liquid, white and thick coatings, non-yellowing
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 1117 Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 15
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
CTFA, toughness, flexibility, good adhesion
Recommended applications
- Flexo Inks
- Screen Inks
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 1117LR Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 15 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
Key features
CTFA, TMPTA free, low shrinkage, good adhesion, high flexibility, toughness, good chemical resistance, non-yellowing
Recommended applications
- Offset Inks
- Flexo Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 1120 Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 3
- REACH No
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
TMCHA, excellent adhesion, low viscosity, high flexibility, good plastic wetting, low surface tension
Recommended applications
- Flexo Inks
- Screen Inks
- Electronics
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 1121M Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 8
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 70
Key features
very high Tg, good cutting power, high hardness, good adhesion and moisture resistance
Recommended applications
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 1121Y Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 8
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 74
Key features
low shrinkage, good water resistance, high abrasion and solvent resistance, excellent temperature resistance
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 1122 Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 30
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Aliphatic Urethane Acrylate, high flexibility and low odor, excellent adhesion on plastics
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 1122TF Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 35
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Aliphatic Urethane Acrylate, tin free, high flexibility and low odor, excellent adhesion on plastics
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 1125 Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 14
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
DCPA, good adhesion on plastics, excellent water resistance, high reactivity
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 1226 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 7
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
MPDDA, good adhesion to plastics, low viscosity, high cutting power, low odor
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 1229M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 10 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
TEGDMA / TRGDMA, low viscosity, excellent flexibility, good adhesion, good heat and chemical resistance, hydrophilic
Recommended applications
- Composites
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 1231 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 136
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
TCDDA, excellent flexibility and toughness, good adhesion and heat resistance, low polarity
Recommended applications
- Offset Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 1232M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 15 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PEG200DMA (Polyethylene Glycol (200) Dimethacrylate) monomer, low viscosity, hardness, good heat resistance
Recommended applications
- Composites
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 1251M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 35 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PEG400DMA (Polyethylene Glycol (400) Dimethacrylate) monomer; low viscosity, flexibility, good adhesion, high clarity, low ashes
Recommended applications
- Composites
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 1254M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 650 mPa.s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Low shrinkage, low volatility, good heat resistance, high refractive index, good chemical resistance, good adhesion on various substrates
Recommended applications
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Medical
- Digital Inks
- 3D Printing
-
GENOMER* 1280M Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 390 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Ethoxylated Bisphenol A Dimethacrylate monomer, low shrinkage, low odor, low volatility, good impact resistance, high clarity
Recommended applications
- Composites
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 2235 Epoxy (Meth)Acrylates
Specifications
- Category Epoxy (Meth)Acrylates
- Functionality 2
- Viscosity 1 100
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
aliphatic epoxy acrylate, high reactivity, very low viscosity, excellent chemical and stain resistance
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 2252 Epoxy (Meth)Acrylates
Specifications
- Category Epoxy (Meth)Acrylates
- Functionality 2
- Viscosity 5 400 (60°C/140°F)
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Epoxy Acrylate, excellent reactivity, high scratch and chemical resistance
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Adhesives
- Coatings on Plastics
-
GENOMER* 2253 Epoxy (Meth)Acrylates
Specifications
- Category Epoxy (Meth)Acrylates
- Functionality 2
- Viscosity 30 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Epoxy Acrylate, high reactivity, high flexibility, medium viscosity, good adhesion on plastics
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 2259 Epoxy (Meth)Acrylates
Specifications
- Category Epoxy (Meth)Acrylates
- Functionality 2
- Viscosity 25 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 14
Key features
Epoxy Acrylate, good pigment wetting and offset properties, medium viscosity, good reactivity
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
-
GENOMER* 2263 Epoxy (Meth)Acrylates
Specifications
- Category Epoxy (Meth)Acrylates
- Functionality 2
- Viscosity 4 000 (60°C/140°F)
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Epoxy Acrylate, excellent reactivity, high scratch and chemical resistance
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 2280 Epoxy (Meth)Acrylates
Specifications
- Category Epoxy (Meth)Acrylates
- Functionality 2
- Viscosity 5 000 (60°C/140°F)
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Epoxy Acrylate, excellent balance of properties, high reactivity, hardness, flexibility and toughness
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Adhesives
- Coatings on Plastics
-
GENOMER* 2281 Epoxy (Meth)Acrylates
Specifications
- Category Epoxy (Meth)Acrylates
- Functionality 2
- Viscosity 4 500 (60°C/140°F)
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 24
Key features
Epoxy Acrylate, excellent balance of properties, high reactivity, hardness, flexibility, toughness, adhesion and pigment wetting and flow
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 3135 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 1
- Viscosity ~530 mPa*s
- REACH Yes
- TSCA Special Status / Contact us
- IECSC Special Status / Contact us
- Swiss ordinance 1
- Bio content (%) 65
Key features
Bio-based Polyester Acrylate, low viscosity, high flexibility, high elongation, excellent clarity, good adhesion,
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 3143 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 1
- Viscosity 800 (60°C/140°F)
- REACH Yes
- TSCA Special Status / Contact us
- IECSC Special Status / Contact us
- Swiss ordinance 2
- Bio content (%) 81
Key features
Polyester Acrylate, high transparency and clarity, low yellowing, Thermoplastic-like behaviour, partly water solubility after curing
Recommended applications
- Screen Inks
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 3303 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 3
- Viscosity 18 000 - 25'000mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
medium up to high reactivity, good scratch and solvent resistance, medium flexibility. The product provides good adhesion onto various substrates such as PVC, polyolefin, polyester and polystyrene.
Recommended applications
- Offset Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Coatings on Plastics
-
GENOMER* 3364 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 3
- Viscosity 130
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Polyether Acrylate, high reactivity, low viscosity, good solvent resistance
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 3365 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 3
- Viscosity 130
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Polyether Acrylate, <0,1% TMPTA, high reactivity, low viscosity, good solvent resistance
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 3414 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 4
- Viscosity 4 500
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Polyether Acrylate, high reactivity, low viscosity, good solvent and scratch resistance, flexibility and adhesion, low Tg
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 3430 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 4
- Viscosity 600
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
Polyether Acrylate, high reactivity in LED formulations, good flexibility, low yellowing, reduces oxygen sensitivity
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Coatings on Plastics
- Digital Inks
-
GENOMER* 3457 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 4
- Viscosity 1 250
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
Polyether Acrylate, high reactivity, high hardness, chemical resistance and adhesion
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 3486 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 4
- Viscosity 500
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 19
Key features
very low viscosity, good chemical resistance, good surface hardness and wear resistance, good adhesion, low yellowing, good pigment wetting, good cure response
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 3497 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 4
- Viscosity 600
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Polyether Acrylate, high reactivity, low viscosity, good solvent resistance
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 3498 Polyester / Polyether Acrylates
Specifications
- Category Polyester / Polyether Acrylates
- Functionality 4
- Viscosity 600
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Polyether Acrylate, <0,1% TMPTA, high reactivity, high gloss, good hardness and scratch resistance, good abrasion and solvent resistance
Recommended applications
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOMER* 4188/EHA Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 1
- Viscosity 120 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, high tack, high elongation and excellent adhesion
Recommended applications
- Screen Inks
- Adhesives
- Coatings on Plastics
-
GENOMER* 4188/M22 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 1
- Viscosity 70 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
High elongation at stress break, low yellowing, good pigment wetting, low shrinkage, Tg-3'C
Recommended applications
- Screen Inks
- Adhesives
- Coatings on Plastics
-
GENOMER* 4212 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 14 000
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, low yellowing, high flexibility, low viscosity, good adhesion
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4215 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 20 000 (60°C/140°F)
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
- Bio content (%) 0
Key features
Aliphatic Urethane Acrylate, good adhesion to PVC and other plastics
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 4215/M22 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 160 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
High flexibility, medium reactivity, excellent light resistance, good adhesion onto plastic substrates
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4217 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 100 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Aromatic Urethane Acrylate, excellent flexibility, good adhesion to difficult substrates, good for metallic inks
Recommended applications
- Offset Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOMER* 4230 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 35 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, good flexibility, non-yellowing, peroxide cure
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4236 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity ~18,000 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
difunctional aliphatic urethane acrylate resin, for radically curable paints, inks, coatings and adhesives. It is recommended for applications where high flexibility, adhesion and outdoor durability are required.
Recommended applications
- Coatings on Plastics
- Wood Coatings
- Screen Inks
-
GENOMER* 4259 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 11 000
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
Aliphatic Urethane Acrylate, high reactivity, low viscosity, high hardness, good toughness, excellent durability, good impact resistance
Recommended applications
- Composites
- Electronics
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 4267 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 16 000 (60°C/140°F)
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
- Bio content (%) 0
Key features
Aliphatic Urethane Acrylate, excellent flexibility and toughness, good adhesion
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4269/M22 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 55 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
- Bio content (%) 0
Key features
Aliphatic Urethane Acrylate, flexibility resin, good toughness, high flexibility, excellent adhesion
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4277 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity 19 000 (60°C/140°F)
- REACH Yes
- TSCA No
- IECSC No
- Swiss ordinance 2
Key features
Urethane Methacrylate, High flexibility and toughness, high transparency and low yellowing, good adhesion, low cure exotherm exothermic
Recommended applications
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 4281 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 2
- Viscosity ~100 000 mPa*s
- REACH Yes
- TSCA No
- IECSC No
- Swiss ordinance 1
- Bio content (%) 55
Key features
High Hardness, high scratch and abrasion resistance, low yellowing, exceptional clarity, good adhesion
Recommended applications
- Coatings on Plastics
- Medical
- Digital Inks
- 3D Printing
-
GENOMER* 4302 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity 10 000 (60°C/140°F)
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 2
- Bio content (%) 0
Key features
fast, hard and excellent chemical resistance, non-yellowing, high E-modulus
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOMER* 4312 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity 60 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
- Bio content (%) 0
Key features
Aliphatic Urethane Acrylate,high reactivity and good flexibility, good adhesion and scratch resistance
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOMER* 4316 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity 58 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, high reactivity and very good flexibility, good adhesion, abrasion and scratch resistance
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOMER* 4335 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity 50 000
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 2
- Bio content (%) 0
Key features
Aliphatic Urethane Acrylate, dual curable OH and acrylate groups, outstanding chemical resistance and hardness
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOMER* 4337 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity 7000 (60°C/140°F)
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, High reactivity, high stain resistance, excellent chemical resistance, exceptional wet-heat resistance, thermoformable, high abrasion resistance, good adhesion, outdoor durability
Recommended applications
- Wood Coatings
- Composites
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4365 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity ~ 16,000 mPa.s
- REACH Yes
- TSCA No
- IECSC Yes
- Swiss ordinance 1
Key features
Urethane methacrylate, very high hardness and E-modulus, high abrasion resistance, excellent solvent resistance
Recommended applications
- Composites
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4379/W Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity 30
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, water-based dispersion, sandable after physical drying
Recommended applications
- Screen Inks
- Wood Coatings
- Coatings on Plastics
-
GENOMER* 4383/W Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity 30
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, water-based dispersion, sandable after physical drying
Recommended applications
- Screen Inks
- Wood Coatings
- Coatings on Plastics
-
GENOMER* 4425 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 4
- Viscosity 4 500
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 2
- Bio content (%) 15
Key features
Aliphatic Urethane Acrylate, high reactivity, low viscosity, balance of flexibility and good hardness
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4515 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 5
- Viscosity 1300
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Aromatic Urethane Acrylate, high reactivity in LED formulations, good hardness, good stain resistance, reduces oxygen sensitivity, improved reactivity and surface cure in UV formulations
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 4590/PP Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 5
- Viscosity 11 000
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 2
- Bio content (%) 0
Key features
Aliphatic Urethane Acrylate, low viscosity, excellent reactivity and hardness
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOMER* 4622 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 6
- Viscosity 30 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
- Bio content (%) 0
Key features
Aromatic Urethane Acrylate, very fast, good hardness and chemical resistance
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENOMER* 4690 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 6
- Viscosity 80 000
- REACH No
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, outstanding hardness, scratch and abrasion resistance and low yellowing
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 4691 Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 6
- Viscosity 100 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Aliphatic Urethane Acrylate, outstanding hardness, scratch and abrasion resistance and low yellowing
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 5142 Oligoamines
Specifications
- Category Oligoamines
- Functionality 1
- Viscosity 20
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Acrylated Amine Synergist, improves cure speed and surface cure, low viscosity, high amine number, excellent compatibility
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOMER* 5161 Oligoamines
Specifications
- Category Oligoamines
- Functionality 1
- Viscosity 80
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
Acrylated Amine Synergist, improves cure speed and surface cure, low viscosity, high amine number, excellent compatibility
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOMER* 5271 Oligoamines
Specifications
- Category Oligoamines
- Functionality 2
- Viscosity 1 200
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Amine Acrylate, moderate viscosity excellent reactivity, flexibility, gloss and color
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
-
GENOMER* 5275 Oligoamines
Specifications
- Category Oligoamines
- Functionality 2
- Viscosity 3 700
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Amine Acrylate, fast surface cure rate, low odor and good adhesion, low Tg flexibilizer
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
-
GENOMER* 5695 Oligoamines
Specifications
- Category Oligoamines
- Functionality 6
- Viscosity 8 000
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
Acrylated Oligoamine, high reactivity in LED formulations, improved reactivity and surface cure in UV formulations, good flexibility, low yellowing, reduces oxygen inhibition, low odor
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER* 6050/GP Co-Resins
Specifications
- Category Co-Resins
- Viscosity 125 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Good pigment wetting, good flow, good flexibility, low misting of inks, high gloss
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Adhesives
- Coatings on Plastics
-
GENOMER* 6050/TM Co-Resins
Specifications
- Category Co-Resins
- Viscosity 125 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Modified Polyester Resin, excellent adhesion on plastics, good offset behavior
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Adhesives
- Coatings on Plastics
-
GENOMER* 6058 Co-Resins
Specifications
- Category Co-Resins
- Viscosity –
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 18
Key features
Sucrose Benzoate, maintains gloss compared with inorganic fillers, good adhesion on plastics
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
-
GENOMER* 6083/ETM Co-Resins
Specifications
- Category Co-Resins
- Viscosity 110 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Good pigment wetting, good flow, low shrinkage, high gloss
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
-
GENOMER* 6083/M22 Co-Resins
Specifications
- Category Co-Resins
- Viscosity 110 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
good scratch and solvent resistance, medium up to high reactivity, medium flexibility and hardness
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOMER* 6083/TP Co-Resins
Specifications
- Category Co-Resins
- Viscosity 110 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
Key features
Inert Resin, good pigment wetting and flow, high gloss, low shrinkage, good flexibility
Recommended applications
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
-
GENOMER* 7244 Specialities
Specifications
- Category Specialities
- Functionality 2
- Viscosity 15 000 mPa.s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
low shrinkage, high tensile strength and high e-modulus, high rigidity for 3D parts, high abrasion resistance, good adhesion
Recommended applications
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 7287 Specialities
Specifications
- Category Specialities
- Functionality 2
- Viscosity 12
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 19
Key features
Specialty Resin, superior matting properties, low viscosity and reasonable reactivity, easy incorporation of matting agent
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Coatings on Plastics
- 3D Printing
-
GENOMER* 7302 Specialities
Specifications
- Category Specialities
- Functionality 3
- Viscosity 110
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
- Bio content (%) 0
Key features
Specialty Resin, low viscosity, low odor, low oxygen inhibition, enhanced surface cure
Recommended applications
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
- Medical
- 3D Printing
-
GENOMER* 7311 Specialities
Specifications
- Category Specialities
- Functionality 3
- Viscosity 1 200
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
Water soluble Acrylate Resin, high reactivity and good flexibility, good adhesion
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Adhesives
- Coatings on Plastics
- 3D Printing
-
GENOMER*4312TF Urethane (Meth)Acrylates
Specifications
- Category Urethane (Meth)Acrylates
- Functionality 3
- Viscosity 60 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
Aliphatic Urethane Acrylate, high reactivity and good flexibility, good adhesion, abrasion and scratch resistance, tin free
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOPOL* BP-2 Polymeric Photoinitiators
Specifications
- Category Polymeric Photoinitiators
- Viscosity 120 000
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
low migration and odor, excellent compatibility in UV formulations
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENOPOL* BP-5 Photoinitiators
Specifications
- Category Photoinitiators
- Viscosity 70 000 – 130 000 mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
High efficiency polymeric benzophenone derivative, low odor, low migration, reduces oxygen Inhibition, high efficiency with amine synergists
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Adhesives
- Coatings on Plastics
- Electronics
-
GENORAD* 20 Additives
Specifications
- Category Additives
- Viscosity 1 000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 2
- Bio content (%) 13
Key features
In-can Stabilizer/Stabiliser, excellent stabilizer in clear coatings
Recommended applications
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
- 3D Printing
-
GENORAD* 40 Additives
Specifications
- Category Additives
- Viscosity 2 000
- REACH Yes
- TSCA Yes
- IECSC No
- Swiss ordinance 1
Key features
adhesion promoter on metal, glass and plastics
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
GENORAD* 41 Additives
Specifications
- Category Additives
- Viscosity 1 500
- REACH No
- TSCA Yes
- IECSC No
- Swiss ordinance 1
- Bio content (%) 0
Key features
adhesion promoter on metal, glass and plastics
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
MIRAMER LR3130 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 65
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
TMPTA(EO)nTA, low residual TMPTA, low residual solvent, toluene free, high reactivity and low oxygen inhibition
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Coatings on Plastics
- Digital Inks
-
MIRAMER M130 Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 7
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
IDA, hydrophobic, flexibility and adhesion, low Tg and surface tension
Recommended applications
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M140 Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 13
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
PH(EO)A, good cutting power, good adhesion on plastics
Recommended applications
- Flexo Inks
- Screen Inks
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M144 Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 35
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
good adhesion, good flexibility, low shrinkage
Recommended applications
- Flexo Inks
- Screen Inks
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M170 Monofunctional Diluents
Specifications
- Category Monofunctional Diluents
- Functionality 1
- Viscosity 10
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
EOEOEA, high flexibility, low shrinkage, low Tg, excellent cutting power
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M200 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 10
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
HDDA, excellent cutting power, outstanding adhesion on plastics, weatherability
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M216 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 15
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
NPG(PO)2DA, low viscosity, good flexibility
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M220 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 18
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
TPGDA, low volatility, good cutting power
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
-
MIRAMER M222 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 15
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
DPGDA, low volatility, good cutting power, high Tg
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M240 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 1200
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
BPA(EO)4DA, good hydrophobic and hydrophilic balance, good heat resistance
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Coatings on Plastics
-
MIRAMER M280 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 70
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PEG400DA, water soluble, high flexibility, low shrinkage and low odor
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
MIRAMER M282 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 25
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PEG200DA, soft and flexible
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
-
MIRAMER M284 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 50
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PEG300DA, water soluble, high flexibility and low shrinkage
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Adhesives
- Coatings on Plastics
-
MIRAMER M286 Difunctional Diluents
Specifications
- Category Difunctional Diluents
- Functionality 2
- Viscosity 85
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
PEG600DA, water soluble, high flexibility and low shrinkage
Recommended applications
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Adhesives
- Coatings on Plastics
-
MIRAMER M300 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 110
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
TMPTA, excellent reactivity, good offset properties, chemical resistance, low volatility
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Coatings on Plastics
- Digital Inks
-
MIRAMER M3130 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 60
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
TMP(EO)3TA, higher reactivity, flexibility and viscosity reduction compared to TMPTA
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Coatings on Plastics
- Digital Inks
-
MIRAMER M3150 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 190
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
TMP(EO)15TA, good flexibility, low shrinkage, hydropholic
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M3160 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 90
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
Key features
TMP(EO)3TA, high reactivity, good flexibility, hydrophilic
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Electronics
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M3190 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 130
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
TMP(EO)9TA, fast surface cure, low shrinkage, partially water soluble
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Composites
- Adhesives
- Coatings on Plastics
-
MIRAMER M320 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 110
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 22
Key features
GPTA, high reactivity, pigment wetting, good hardness and litho properties
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Coatings on Plastics
- 3D Printing
-
MIRAMER M340 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 1800
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PETA, high reactivity and hardness with pendant OH groups, chemical resistance and low vapor pressure
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Coatings on Plastics
-
MIRAMER M360 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 110
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
TMP(PO)3TA, high reactivity, good flexibility
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Composites
- Adhesives
- Coatings on Plastics
- Digital Inks
-
MIRAMER M4004 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 4
- Viscosity 150
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
PPTTA, high reactivity, excellent scratch resistance
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Coatings on Plastics
-
MIRAMER M410 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 4
- Viscosity 600
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
DiTMPTA, excellent reactivity and cross-linking
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Composites
- Electronics
- Coatings on Plastics
-
MIRAMER M600 Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 6
- Viscosity 7000
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 0
Key features
very high reactivity and surface hardness
Recommended applications
- Offset Inks
- Flexo Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Electronics
- Adhesives
- Coatings on Plastics
-
MIRAMER* M320F Tri- & Polyfunctional Diluents
Specifications
- Category Tri- & Polyfunctional Diluents
- Functionality 3
- Viscosity 80-120mPa*s
- REACH Yes
- TSCA Yes
- IECSC Yes
- Swiss ordinance 1
- Bio content (%) 22
Key features
GPTA, high reactivity and low oxygen inhibition, good abrasion and solvent resistance, high flexibility
Recommended applications
- Offset Inks
- Screen Inks
- Overprint Varnishes
- Wood Coatings
- Coatings on Plastics
- 3D Printing
